Reflective powder: white reflective powder, silver-gray reflective powder 

 Application: widely used in screen printing, reflective paint, reflective inks, traffic signs, reflective materials and other fields. 

 Features: anti-oxidation, high temperature, reflective effect. 

 Technical parameters: 1. Color: White / Grey 2. Refractive index: ND = 1.93 3. Size :150-500 mesh (25 microns -105 microns) 4. Roundness: ≥ 93% 5. Translucency ≥ 95% 6. Hardness (Mohs): 400 7. temperature ≥ 850 ℃ 8. Density: 4.1 ± 0.2g / c ㎡ 

 One. Usage: (screen printing method) 

 A water-based screen printing method: reflective powder can be added directly to the company's reflective slurry, adjusting uniform (appropriate to add additives to enhance the fastness), can be printed, printing. 

 Water-based silk screen method two: reflective powder can be added directly to the transparent cytoplasm, uniform tone (you can add the appropriate additives enhance the fastness), can be printed, printing. 

 Oil-based printing method one: reflective powder can be added directly to the varnish, the tone evenly (you can add the appropriate additives enhance the fastness), you can print, printing. 

 Oil-based printing method II: can be added directly to the ink, made of reflective ink, silk screen or brush to the fabric or other items, the use of simple operation, easy to master. Add the amount added by the number of reflective brightness. 

 Oil-based printing method three: first, reflective top coat primer printing paste --- --- drying curing reflective pulp slurry preparation: According to how much amount will be weighed after the first use of reflective powder solvent (cyclohexanone) into a paste , and then added to the transparent printing paste compound, adjusting uniform use. * Printing, the printing layer thickness should be thin, -50 microns to 30 microns is appropriate to ensure that the powder can Banlu reflective surface to produce reflective effect. Can use, with thickness ranging from size, to obtain all kinds of reflective effect. (Size range, reflecting the better) 

 II. Usage: (spray) 

 1. The first reflective spray paint base, to be reflective paint dry, then spray reflective paint. If the construction of the cement surface, the proposed two-reflective spray paint better 

 2. Recommend the use of W-71-type spray gun (nozzle ￠ 1.50 mm), primer about using the gun pressure 2.0Kg/cm2, paint spray gun pressure around 3.0kg/cm2 

 3. Construction of the gun and the surface of the need to maintain 18cm, spray angle 45 °, are thin paint film to obtain good effect. On unknown substrate, small area prior to the trial 

 4. Do not rain and fog, snow and other inclement weather, construction, will affect the fastness. 

 Note: 1. Construction before use to clean the surface, the surface without oil and dry. 2. Pre-construction must be reflective reflective paint primer and stir; painting process to keep stirring to prevent the reflective powder precipitation.